H12-893_V1.0퍼펙트최신버전덤프자료최신시험덤프공부자료

Huawei H12-893_V1.0시험패스는 어려운 일이 아닙니다. PassTIP의 Huawei H12-893_V1.0 덤프로 시험을 쉽게 패스한 분이 헤아릴수 없을 만큼 많습니다. Huawei H12-893_V1.0덤프의 데모를 다운받아 보시면 구매결정이 훨씬 쉬워질것입니다. 하루 빨리 덤프를 받아서 시험패스하고 자격증 따보세요.

여러분이 어떤 업계에서 어떤 일을 하든지 모두 항상 업그레이되는 자신을 원할 것입니다.,it업계에서도 이러합니다.모두 자기자신의 업그레이는 물론 자기만의 공간이 있기를 바랍니다.전문적인 IT인사들은 모두 아시다싶이Huawei H12-893_V1.0인증시험이 여러분의 이러한 요구를 만족시켜드립니다.그리고 우리 PassTIP는 이러한 꿈을 이루어드립니다.

>> H12-893_V1.0퍼펙트 최신버전 덤프자료 <<

H12-893_V1.0인증시험 덤프공부 & H12-893_V1.0퍼펙트 덤프데모문제 다운

Huawei인증 H12-893_V1.0덤프로Huawei시험을 패스,하지 못하셨다구요? 최선을 다했는데도 실패하였다는 말은 영원히 하지마세요. Huawei인증 H12-893_V1.0시험을 패스하는 방법은 많고도 많습니다. PassTIP의Huawei인증 H12-893_V1.0덤프로 시험에 다시 도전해보세요. PassTIP의Huawei인증 H12-893_V1.0덤프는 착한 가격에 100%에 달하는 적중율과 패스율을 보장해드립니다. 시험에서 불합격성적표를 받으시면 덤프구매시 지불한 덤프비용을 환불처리해드립니다. PassTIP의Huawei인증 H12-893_V1.0덤프로 시험패스를 꿈꿔보세요.

최신 HCIP-Data Center H12-893_V1.0 무료샘플문제 (Q11-Q16):

질문 # 11
In the spine-leaf DCN architecture, the border leaf node and service leaf node can be deployed on the same device.

A. TRUE
B. FALSE

정답：A

설명：
In Huawei's spine-leaf data center network (DCN) architecture, the topology consists of spine nodes (core) and leaf nodes (access/aggregation). Leaf nodes can serve different roles:
Border Leaf Node: Connects the DCN to external networks or other domains, handling Layer 3 routing.
Service Leaf Node: Connects to internal services (e.g., servers, VMs), often handling Layer 2/Layer 3 traffic.
In practice, a single physical device can be configured to perform both roles (border and service) if it has the necessary interfaces and routing capabilities. Huawei's CloudFabric documentation supports this flexibility, allowing a leaf switch to act as both a border and service node based on configuration (e.g., using VRFs or VXLAN gateways). This reduces hardware costs and simplifies deployment in smaller DCNs.
The statement is TRUE (A) because the border leaf and service leaf roles can be deployed on the same device in a spine-leaf architecture.

질문 # 12
In which of the following phases can CloudFabric implement full-lifecycle automatic network management and control? (Select All that Apply)

A. Service provisioning
B. Planning and construction
C. O&M and monitoring
D. Change optimization

정답：A,B,C,D

설명：
Huawei's CloudFabric solution provides an SDN-based framework for data center network management, supporting automation across the network lifecycle. Let's evaluate each phase:
A . Planning and construction: This is true. CloudFabric automates network design, resource allocation, and deployment during the planning and construction phase using tools like iMaster NCE. TRUE.
B . Service provisioning: This is true. Automated service orchestration (e.g., VXLAN tunnel setup, tenant configuration) is a key feature during provisioning. TRUE.
C . O&M and monitoring: This is true. CloudFabric offers real-time monitoring, fault detection, and performance optimization through centralized management. TRUE.
D . Change optimization: This is true. The solution supports automated upgrades, policy adjustments, and optimization based on analytics, covering the change management phase. TRUE.
All phases A, B, C, and D are supported by CloudFabric's full-lifecycle automation.

질문 # 13
Which of the following can be used as the conditions for microsegmentation to divide EPGs? (Select All that Apply)

A. VM name
B. IP address
C. Operating system
D. MAC address

정답：A,B,C,D

설명：
Microsegmentation in Huawei's data center networks (e.g., CloudFabric with SDN) divides Endpoint Groups (EPGs) to enforce fine-grained security policies. EPGs group endpoints (e.g., VMs) based on attributes. Let's evaluate each option:
A . Operating system: This is true. The OS type (e.g., Linux, Windows) can be used to segment EPGs, enabling policy enforcement based on OS-specific security needs. TRUE.
B . VM name: This is true. VM names can be used as identifiers for microsegmentation, allowing policies to target specific VMs. TRUE.
C . IP address: This is true. IP addresses are commonly used to define EPG boundaries, especially for network-based segmentation. TRUE.
D . MAC address: This is true. MAC addresses can segment EPGs, particularly for Layer 2-based policies or device-specific isolation. TRUE.
All options A, B, C, and D are valid conditions for microsegmentation to divide EPGs in Huawei's implementation.

질문 # 14
Which of the following protocols is used to back up session tables between the active and standby firewalls in the hot standby scenario?

A. VRRP
B. HRP
C. M-LAG
D. BFD

정답：B

설명：
In a hot standby scenario, firewalls (e.g., Huawei USG series) maintain high availability by synchronizing session tables between active and standby devices to ensure seamless failover. Let's evaluate each protocol:
A . M-LAG (Multi-Chassis Link Aggregation): M-LAG is a link aggregation technology for switches, not designed for session table backup between firewalls. Incorrect.
B . VRRP (Virtual Router Redundancy Protocol): VRRP provides gateway redundancy by electing a master router, but it does not handle session table synchronization between firewalls. Incorrect.
C . BFD (Bidirectional Forwarding Detection): BFD is a fast failure detection protocol used with routing protocols, not for session table backup. Incorrect.
D . HRP (Hot Standby Redundancy Protocol): HRP is Huawei's proprietary protocol specifically designed for firewall hot standby scenarios. It synchronizes session tables, configuration data, and status information between active and standby firewalls to ensure stateful failover. Correct.
Thus, the answer is D (HRP).

질문 # 15
VXLAN is a network virtualization technology that uses MAC-in-UDP encapsulation. What is the destination port number used during UDP encapsulation?

A. 0
B. 1
C. 2
D. 3

정답：D

설명：
VXLAN (Virtual Extensible LAN) is a network overlay technology that encapsulates Layer 2 Ethernet frames within UDP packets to extend Layer 2 networks over Layer 3 infrastructure, widely used in Huawei's CloudFabric data center solutions. The encapsulation process, often referred to as "MAC-in-UDP," involves wrapping the original Ethernet frame (including MAC addresses) inside a UDP packet.
UDP Encapsulation: The VXLAN header follows the UDP header, and the destination UDP port number identifies VXLAN traffic. The Internet Assigned Numbers Authority (IANA) has officially assigned UDP port 4789 as the default destination port for VXLAN.
Options Analysis:
A . 4787: This is not a standard VXLAN port and is not recognized by IANA or Huawei documentation.
B . 4789: This is the correct and widely adopted destination port for VXLAN, as specified in RFC 7348 and implemented in Huawei's VXLAN configurations.
C . 4790: This port is not associated with VXLAN and is unused in this context.
D . 4788: This is not a standard VXLAN port; it may be confused with other protocols but is not correct for VXLAN.
Thus, the destination port number used during UDP encapsulation in VXLAN is B (4789), aligning with Huawei's VXLAN implementation standards.

질문 # 16
......

IT전문가들이 자신만의 경험과 끊임없는 노력으로 만든 최고의Huawei H12-893_V1.0학습자료---- PassTIP의 Huawei H12-893_V1.0덤프! Huawei H12-893_V1.0덤프로 시험보시면 시험패스는 더는 어려운 일이 아닙니다. 사이트에서 데모를 다운받아 보시면 덤프의 일부분 문제를 먼저 풀어보실수 있습니다.구매후 덤프가 업데이트되면 업데이트버전을 무료로 드립니다.

H12-893_V1.0인증시험 덤프공부: https://www.passtip.net/H12-893_V1.0-pass-exam.html

Huawei H12-893_V1.0인증시험은 전업적지식이 강한 인증입니다, 일반적으로Huawei H12-893_V1.0인증시험 덤프공부인증시험은 IT업계전문가들이 끊임없는 노력과 지금까지의 경험으로 연구하여 만들어낸 제일 정확한 시험문제와 답들이니, H12-893_V1.0인기덤프자료는 업계에서 널리 알려진 최고품질의 H12-893_V1.0시험대비자료입니다, H12-893_V1.0인증시험덤프 덤프구매전 한국어 온라인 상담서비스부터 구매후 덤프 무료 업데이트버전 제공, H12-893_V1.0인증시험 덤프 불합격시 덤프비용 전액환불 혹은 다른 과목으로 교환 등 저희는 구매전부터 구매후까지 철저한 서비스를 제공해드립니다, 전문적인 IT업계인사들이 H12-893_V1.0시험의 기출문제에 대하여 연구하여 시험준비중인 여러분들께 유용하고 필요한 H12-893_V1.0시험가이드를 제공해드립니다.

내가 가고 싶으면 가는 것이야, 그러고 보니 나 오기 전까지 뭐 하고 있었습니까, Huawei H12-893_V1.0인증시험은 전업적지식이 강한 인증입니다, 일반적으로Huawei인증시험은 IT업계전문가들이 끊임없는 노력과 지금까지의 경험으로 연구하여 만들어낸 제일 정확한 시험문제와 답들이니.

Ryan Morris Ryan Morris

Biography

H12-893_V1.0퍼펙트최신버전덤프자료최신시험덤프공부자료

H12-893_V1.0인증시험 덤프공부 & H12-893_V1.0퍼펙트 덤프데모문제 다운

최신 HCIP-Data Center H12-893_V1.0 무료샘플문제 (Q11-Q16):

최신버전 H12-893_V1.0퍼펙트 최신버전 덤프자료 퍼펙트한 덤프 구매후 불합격시 덤프비용 환불

Quick Links

Resources

Support